Super Resolution Mapping To Determine Shoreline Position Environmental Sciences Essay

Coastal zone and shoreline monitoring is an of import undertaking in sustainable development and environmental protection. For coastal zone monitoring, shoreline extraction in different times is a cardinal work. Features of H2O, flora and dirt make the usage of the images that contain seeable and infrared sets widely used for coastline function Conventionally, photogrammetric technique is employed to map the tide-coordinated shoreline from the aerial exposure that are taken when the H2O degree reaches the coveted degree. On site study taken at these H2O degrees are more expensive to obtain than distant feeling imagination. With the development of distant feeling engineering, orbiters can capture high-resolution imagination with the capableness of bring forthing shoreline place. In recent old ages, satellite remote feeling information has been used in automatic or semi- automatic shoreline extraction and function. Braud and Feng ( 1998 ) evaluated threshold degree slice and multi-spectral image categorization techniques for sensing and word picture of the Louisiana shoreline from 30 m spacial declaration Landsat Thematic Mapper ( TM ) imagination. They found that thresholding TM Band 5 was the most dependable methodological analysis. Frazier and Page ( 2000 ) quantitatively analyzed the categorization truth of H2O organic structure sensing and word picture from Landsat TM informations in the Wagga part in Australia. Their experiments indicated that the denseness slice of TM Band 5 achieved an overall truth of 96.9 per centum, which is every bit successful as the 6-band maximal likeliness categorization. Besides multi-spectral orbiter imagination, SAR imagination has besides been used to pull out shorelines at assorted geographic locations ( Niedermeier, et A l. 2000 ; Schw & A ; auml ; bisch et Al. 2001 ) . While the really all right spacial declaration detectors ( e.g. IKONOS ) offers increased spacial declaration, the imagination from such systems is frequently inappropriate for many users, peculiarly if a big country is to be mapped ( Mumby and Edwards, 2002 ) . Therefore, if constrained to utilize fine-to-moderate spacial declaration ( 0.10 m ) imagination, there is a desire to map the water line at a subpixel graduated table. In such state of affairss the purpose is, hence, to deduce a map that depicts the characteristic of involvement at a graduated table finer than the informations set from which it was derived, which may be achieved through a super-resolution analysis ( Tatem et al. 2001, Verhoeye and De Wulf 2002 ) . 3.2 Test site The work focused on a 38 kilometer stretch of along a seashore off the North West Cape in the north west seashore of Western Australia ( Figure 3.1 ) . The shoreline was characterized by different beaches such as flaxen beaches, muddy and drop and facing to the Exmouth Gulf in the Indian Ocean. Exmouth Gulf is really shallow, with an mean deepness of about 10 m and northerly confronting drowned river vale in northwest Australia reverse estuarine embayment on the northwest shelf of Australia. The tidal scope is less than 2 m and varies little between neap and spring tides. The Exmouth part is exposed to preponderantly south to southeasterly air currents throughout the twelvemonth ( Bureau of Meteorology, 1988 ; Lough, J.M. , 1998. Coastal clime of northwest Australia and comparings with the Great Barrier Reef: 1960 to 1992. Coral Reefs 17, pp. 351-367. Full Text via CrossRef | View Record in Scopus | Cited By in Scopus ( 10 ) Lough, 1998 ) . During spring and summer by and large moderate ( 21-30 kilometers per hour ) southward winds dominate, and fall and winter records show by and large lighter ( 11-20 kilometers per hour ) air current velocities with fluctuations between the dominant sou'-east air current and north to northeast air currents. The air current government is controlled chiefly by the interplay of the southeasterly trade air current system and the west coast-generated sea zephyr, in concurrence with a local sea zephyr developed within the Gulf. australia1-edit.JPG Figure 3.1: Location of shoreline trial site ( shaded ) and selected as had scope of morphologies in a survey country. 3.3 Data sets The survey used a series of harsh spacial declaration National Oceanic and Atmospheric Administration ( NOAA ) images over survey site to bring forth a ace declaration image. For this survey, the shoreline was defined as the place of the boundary between H2O and land at the clip satellite imagery acquisition. The NOAA series of orbiters which each carry the Advanced Very High Resolution Radiometer ( AVHRR ) detector. These detectors collect planetary information on a day-to-day footing for a assortment of land, ocean, and atmospheric applications. Specific applications include forest fire sensing, flora analysis, weather analysis and prediction, climate research and anticipation, planetary sea surface temperature measurings, ocean kineticss research and hunt and deliverance ( CCRS, 1998 ) . 3.3.1 AVHRR detector features AVHRR informations set is comprised of informations collected by the AVHRR detector and held in the archives of the Geoscience Australia. Carried aboard the National Oceanic and Atmospheric Administration`s ( NOAA ) Polar Orbiting Environmental Satellite series, the AVHRR detector is a broad-band, 4- or 5-channel scanning radiometer, feeling in the seeable, near-infrared, in-between infrared and thermic infrared parts of the electromagnetic spectrum. It provides planetary on board aggregation of informations over a 2399 kilometer swath. The detector orbits the Earth 14 times each twenty-four hours from an height of 833 kilometer. In this survey, NOAA images acquired from Geoscience Australia and NOAA antenna in Alice Springs permits acquisition of twenty-four hours and night-time base on ballss. There are usually about two day-time base on ballss per orbiter and two night-time base on ballss per orbiter. The detector parametric quantities as shown Table 3.1. Merely informations acqui red in Channel 2 ( 0.725 – 1.00 Â µm ) was used for this survey because land H2O boundaries clearly seen on the image. Table 3.2 shows an AVHRR Spectral Characteristics. Table 3.1: Spacecraft Parameters Swath breadth 2399km Resolution at low-water mark 1.1km approx. Altitude 833km Quantization 10 spot Orbit type Sun synchronal Number of orbits per twenty-four hours 14.1 ( approx. ) Table 3.2: AVHRR Spectral Characteristics Channel No. Wavelength Typical usage NOAA-15, 16, 17, 18 ( Â µm ) 1 0.58 – 0.68 Daytime cloud and surface function 2 0.725 – 1.00 Land-water boundaries 3 N/A Night cloud function, sea surface temperature 3A 1.58 – 1.64 Snow and ice sensing 3B 3.55 – 3.93 Night cloud function, sea surface temperature 4 10.30 – 11.30 Night cloud function, sea surface temperature 5 11.50 – 12.50 Sea surface temperature 3.3.2 Reference Data Landsat TM information of the North West Cape, Australia was acquired on 24 August 2007 with a spacial declaration 30 m ( Figure 3.2 ) . The Landsat way was 115 and WRS Row 075 were geometrically corrected and georeferenced to WGS 84 ( universe co-ordinate system ) .o Georeference imagination is defined imagination which has been corrected to take geometric mistakes and transformed to a map projection. Georeferenced image rectification can take one of the two signifiers, systematic and preciseness. Systematic rectification involves utilizing orbital theoretical accounts of the orbiter plus telemetry informations to happen the approximate relationship between the image and the map coordinates. Precision rectification uses land control points to register the image to absolute geographical co-ordinates. In other words, in a geo-referenced image the pels and lines are non aligned to the map projection grid geo-referenced image the pels and lines are non aligned to the map projection grid . A Landsat 5 TM scene has an instantaneous field of position ( IFOV ) of 30 m by 30 m ( 900 square metres ) in bands 1 through 5 and band 7, and an IFOV of 120 m by 120 m ( 14,400 square metres ) on the land in set 6. Merely band 4 ( 0.76 – 0.90 Â µm ) was used for delineate a shoreline. landsat1.JPG Figure 3.2: Landsat 5 TM informations over study country. Acquired day of the month: 24 August 2007 3.4 Method In the context of ace declaration techniques, it is assumed that several harsh spacial images can be combined into a individual all right spacial image to increase the spacial declaration content. The harsh spacial images can non all be indistinguishable and there must be some fluctuation between them, such as translational gesture analogue to the image plane ( most common ) , some other type of gesture ( rotary motion, traveling off or toward the camera ) , or different screening angles. In general, ace declaration can be broken down into two wide parts: I ) enrollment of the alterations between the harsh spacial images, and two ) Restoration, or synthesis, of the harsh spacial images into a all right spacial image ; this is a conceptual categorization merely, as sometimes the two stairss are performed at the same time. In this survey, the aim is to bring forth all right spacial declaration image from multiple harsh declaration images. Fine spacial declaration image has been applied with object designation methods which may build with regard to image enrollment and super-resolution building. All parametric quantities are used iteratively and do object designation secured from mistake response and been processed in hardiness, accurate and preciseness manner. 3.4.1. Image Registration Image enrollment is the procedure of covering two or more images of the same scene taken at different times, from different point of views or by different detectors. Image enrollment is a important measure in all image analysis undertakings in which the concluding information is gained from the combination of assorted informations beginnings like in image merger. Image enrollment consists of following four measure ; characteristic sensing, characteristic matching, transform theoretical account appraisal and image resampling and transmutation. i. Geometric Registration The geometric deformations present in airborne remotely perceived images may be categorized into system-independent and system-dependent deformations. The system independent deformations are caused by the gesture of the detector and by surface alleviation. Figure 3.3 shows on instance of images which are related by a planar projective transmutation or alleged planar homography. There are two different state of affairss where ( a ) images of a plane viewed under arbitrary camera gesture and ( B ) image of an arbitrary 3D scene viewed by a camera revolving about its ocular Centre or zooming. Figure 3.3: Two imaging scenarios for which the image-to-image correspondence is captured by a planar homography ( Capel and Zimmerman, 2003 ) Under a planar homography, points are mapped as: ten ‘ = Hx, where ten ‘ correspondence point of mention points x in other image and H is a 9 transmutations projection. The different of planar homography based on transmutation matrix attack below: or equivalently ; ( 3.1 ) ten ‘ = Hx The tantamount non-homogeneous relationship is ( 3.2 ) The scenario depicts in which homography will happen when a freely traveling camera views a really distant scene, such instance in airborne remote sansing ( Forte and Jones, 1999 ) . ( two ) Photometric Registration Photometric enrollment refers to the process by which planetary photometric transmutations between images are estimated. This enrollment traveling to use a theoretical account which allows for an affine transmutation ( contrast and brightness ) per RGB shows below. 3.3formula3.GIF Where, r1, g1, b1 are RGB channel in image 1 while r2, g2, b2 indicate RGB channel in image 2. Matrix A is used to calculate the remainder of brightness and contrast ? . Image enrollment of homography image concludes in Figure 3.4, last two stairss iterate until the figure of itelaration is stable. method.GIF Figure 3.4: Procedure to gauge a homography between two images. In order to deduce ace declaration image utilizing multiple series of low declaration images, all images need to register at the same time and corrections may easy implemented. Block bundle accommodation traveling to be considered as the best calculator to calculate all braces of back-to-back frames in the input sequence. Parameters such as interlingual renditions, rotary motions, graduated table, contrast and brightness, characteristic base enrollment, RANSAC ( RANdom SAmple Consensus ) and fiting could be done at the same time in every image brace. Generative image formation theoretical account is the best image formation algorithms which may see geometric transmutation of n images, point spread map which uniting effects of optical fuzz and gesture fuzz, down-sampling operator by a factor S where trying rate traveling to be entree, scalar light parametric quantities and observation noise. This theoretical account is generalized as follows: formula4.GIF f = mulct spacial declaration image gn = nth observed harsh spacial declaration image ?n = geometric transmutation of n-th image H = point dispersed map sv = down-sampling operator by a factor S ?n, ?n = scalar light parametric quantities ?n = observation noise 3.5 Hard categorization To distinguish between land and H2O organic structure a difficult classifier was applied to the fake coarse spacial declaration orbiter detector imagination. The maximal likeliness difficult classifier used to sort the harsh spacial declaration imagination ( NOAA AVHRR ) . The same preparation sites used in sorting the all right spacial declaration image ( cite informations ) were used ( Figure 4.5 ) . Using these developing sets the 20 m imagination was classified to 2 categories ( land and H2O ) . The resulting image ( Figure 3.7 ) would subsequently be analysed to find the positional mistake between the predicted shoreline location and the existent location based on the land informations. densitynooa.jpg ( a ) densitylandsat.jpg ( B ) Figure 3.5: ( a ) 1100 m spacial declaration and ( B ) 30 thousand spacial declaration classified imagination 3.7 Soft Categorization Difficult categorization techniques have been popular in distant feeling but they merely assign one category to a certain pel ( Jensen, 1996 ) . As shoreline pels normally contain a mixture of land and H2O categories, information within a pel is lost. A major job for accurate reading of distant feeling informations is related to the fact that pels may incorporate more than 2 categories which would merely be realised from land activities ( Foody, 1992. To turn to this job research workers have developed methods to deduce estimations of the sub-pixel category composing through the usage of techniques such as mixture modeling and soft or fuzzed categorizations ( Foody, 1996 ) . Soft classifiers allow pels to hold variable grades of rank to multiple categories. Soft classifiers assign a rank class between 0 and 1 to each category in a pel. This allows a pel to be associated to multiple categories instead than merely to one category as in conventional difficult classifiers. The end product of the soft categorization for each pel was an indicant of the comparative rank to the two categories and, in the country where rank was greatly assorted, this was taken as an estimation of the relative screen of the constituent categories ( figure 3 ) . noaa.jpglegend.GIF Figure 3.6: End product of soft categorization. The gray graduated table indicates the grade of rank to the land category. 3.8 Super declaration Maping The water line was mapped from the ace declaration image generate from the series of harsh spacial declaration image.. The same preparation sites were used in all the categorizations. As a benchmark, a conventional difficult categorization was used to foretell the water line from the fake image. The water line was fitted to the derived end product of this categorization by weaving it between pels allocated to the different categories. sr.JPG ( a ) density_sr.JPG ( B ) sr.JPG ( degree Celsius ) Figure 3.7: Ace declaration technique ( a ) individual image ( B ) difficult categorization of ace declaration image ( degree Celsius ) water line word picture. 3.tif ( a ) 5.tif ( B ) 12a.tif ( degree Celsius ) 15a.tif ( vitamin D ) 20.tif ( vitamin E ) 20.tif ( degree Fahrenheit ) Figure 3.8: End product of ace declaration technique ( a ) 3 images ( B ) 5 images ( degree Celsius ) 12 images ( vitamin D ) 15 images ( vitamin E ) 30 images ( degree Fahrenheit ) 50 images. 3.8 Positional Error Analysis End product from a difficult and soft categorization produces images with pels values stand foring the proportion of a certain category within pels. But it does non bespeak where within a pel these categories are located. To turn to this job, methods of administering the proportion within each pel to different categories were explored. The truth of shoreline maps generated at each spacial declaration from application of the difficult categorization, soft categorization and ace declaration method from multiple images were analysed for survey country ( Figure 3.1 ) . For each infusion and coarse-spatial declaration image, the truth of the shoreline anticipation derived was determined by comparing the to the Landsat 5 TM informations for every meter of the shoreline ( Table 3.3 ) The positional truth along the 38km length of shoreline in each infusion is shown in Table 3.3: Positional truth of the each method. Method Hard Classification Soft Categorization Super Resolution RMSE ( m ) 72.2 m 32.1 m 1 image: 14.8 m 3 Images: 7.21 m 5 Images: 6.25 m 12 Images: 5.33 m 15 Images: 5.17 m 30 Images: 5.08 m 50 Images: 8.07 Measure RSME ( m )

Innovative Product

Introduction Nowadays, innovative is an essential advantage in this dog-eat-dog market for every organization. Innovative can be everything that is new and not exist in current market, however in order to fulfill the gap in this demanding market, organizations must be very innovative to come out with new products and services. Organizations nowadays are recruiting employees who are creative and innovative because they are person who have sensitive antenna to sense and observe what the people want and need.In current market, thermos water bottle is very common for people to store their drinks; because thermos water bottle allows people to keep their drinks cold or warm for a very short period of time. Therefore, there would be a gap exists where the people want to drink cold or hot beverage at anytime and anywhere they want. To fulfill this gap, DualBottle has came out as it is a thermos water bottle which has the function of heating and freezing the beverage inside the thermos water bottle at anytime the customer wants.In other words, DualBottle will act like a refrigerator to chill the water as cold as it can or heating up the water just like a water boiler. In the current market, there is no similar product that has the function like DualBottle and this innovative product will bring in another level of convenience to the consumers in the market. Hence, people may want this new product to be in the market. In fact, water bottle in the current market is only used for storing water and sometimes not even suitable to store hot water as some water bottles have no qualified certificate because it is made of lower quality of plastic.In addition, DualBottle enables people to get hot or cold water easily in their daily activities. In this assignment, we are going to discuss in-depth on market research of DualBottle and also new product descriptions and specifications. Market Research Direct competitors There are several direct competitors for DualBottle which they hav e the similar types of product in the same market such as heaters, coolers and normal water bottles. In this case, keeping on track on consequential technological innovations is very important for a particular company to maintain a competitive advantage in the market.Firstly, the innovative product will have certain competition and comparatives with those existing and well-known brand like Thermos, Zebra, Camelback, Klean Kanteen, SIGG, Cheeki, Eco vessel and many more. These brands are the direct competitors for the DualBottle because these brands produce quality stainless steel and aluminium water bottles similar to the DualBottle but of course every brand has its specialty of their own products such as the designs, different attractive colors, functions, specifications, future and its outlook.These brands are the main direct competitors for DualBottle because both these products from these brands have the similar functions of heat preservation and have these brands are historical as compared with the new product. Though our new innovative product, DualBottle can reheat and re-chill the drinks; however, the existing of the products can only help to maintain the heat and the warmness of the drinks. In fact, people may be more likely to choose old brand due to brand loyalty and influenced by the power of word of mouth.The brand new product might be very novel yet it is still under the observation period to attract and being recognized by the people. On the other hand, old products are more creditable and always have good comments from one consumer to another consumer. Indirect competitors Beside those direct competitors, there are a number of indirect competitors for the DualBottle. Indirect competitors are the competitors that compete with the DualBottle indirectly. For example refrigerators that can cool the water, this is an indirect competitor because households have refrigerators at home.So it is considered as an indirect competitor. On the other hand, th e kettle and hot water flask are also indirect competitors to the DualBottle because at home people use kettle to boil water and hot water flask because the flask is to keep the hot water to remain hot. Other than that, Mineral waters that are sold in sundry shops, supermarkets, convenient shops, and other places are considered as indirect competitors because they have cold beverages and warm beverages separately. Instead of purchasing DualBottle, customers might just purchase mineral waters for daily usage.Besides that, water dispensers are the main indirect competitors because the DualBottle mostly targeted customers are people who work in office, travel daily and also students. Water dispensers are available in all colleges and offices. Hence, instead bringing the water bottles along with them, customers may prefer using the water dispenser for cold and warm drinks. So it is considered a main competitor to the DualBottle that competes in the market. Furthermore, companies such as Starbucks also are served as the indirect competitor for the new product.Although Starbucks specialized on producing good and tasty coffee, the company itself has launched their own tumbler which also has the similar function with this new product as tumbler can be used to fill up the hot beverages. Besides that, Starbucks also has a promotion for its own customers by using the tumbler when they purchase hot beverage. They can get the RM2 rebate by using the tumbler. Hence, most of the customers who loyal and fascinating in Starbucks will tend to purchase the tumbler to get better offer. This phenomenon also will be one of the issues for the launching of new product.Next, in terms of the future competition for the DualBottle where in this new era technology is growing in a fast pace, all the products that selling in the market already be advanced. In the past years, these products are not in existence. However, in today’s fast development society, these products cannot be le ft out and more innovative and modern products are being launched. Most of the young adults have strong interest in trying new products. When this situation happened, all of the past products might be left out.Thus, to consolidate the base of new product in the competitive market, branding should be taken into consideration. Future competitors not only on the products themselves, but also included the consumer behaviour in today’s society. There will be always new competitors that will enter the market because of the advance of the technology. Target customers The innovative product, water bottle thermos is designed to satisfy all the needs of the individual and company. Furthermore, targeted customers are normal people who travel a lot; they can keep warm or cold water together with them while travelling in the car or bus.For instance, long distance travellers can keep hot coffee in the DualBottle so they can drink it while travelling to keep them fresh. Besides that, we are also targeting DualBottle on working adults and students who usually face with busy and tight schedule where they may be even unable to have their proper meals. For example, an event executive, Amanda is too busy with her task and could not even find time to have her meals and so, with this DualBottle, she is now able to enjoy her favourite drinks either in hot or cold at anytime and anywhere even when she is busy.With our unique selling point of DualBottle, that is the ability to reheat and re-freeze the drinks quickly by using the steel casing in which making DualBottle appeared to be so practical; it may also attract many companies to purchase our product as it can provide a high level of convenience to their employees. Therefore, we may be indulging ourselves in both B2B and B2C market in order to gain higher market share respectively and establishing a strong position in the market. We strongly believe that targeting the right consumers will achieve a desirable benefit to our innovative product, DualBottle.New Product First of all, stainless steel water bottle maybe very common in this current market such as Thermos, Klean Kanteen, Thinksport, and Eco Vessel. In fact that, there are just normal insulated water bottles which can keep drinks cold or hot for a short period however; DualBottle is coming up with an innovative idea where the water bottle is chargeable in order to heat up the drinks or make the drinks chilled. Although it appears to be nothing different from ordinary bottle, DualBottle has a ‘magic' function that cannot be found in the current market.The uniqueness that able to chill soft drinks or to retain temperature of warm Chinese tea with a tiny â€Å"plug and play† kind of component attached to make DualBottle more standout. Similarly to some other portable coolers, it uses thermoelectric cooling system concept to switch between two modes (cold and hot) with just a button. In line with technology advancement, DualBottle is d esigned with an external component that can be attached from the bottom of the bottle and it is contacted with a metal plate to serve as conductor in order to transmit cold and heat.Meanwhile, instead of operating in 12 or 24 volts direct current (DC) which is similar to mini fridge, we would replace the battery storage with a 2800 milli-Ampere-hour (mAh) rechargeable battery. For instance, two hours are required to get the battery fully charged and it could be used for ten consecutive hours. Besides, there would be two different ways to charge the battery component by using direct current (DC) and alternating current (AC). It would be more convenient as users do not need to plug-on direct current or alternating current in order to use of the function because there would be power reserved in battery component.Additionally, DualBottle will have an automatic power switch off when the water temperature is heated up to 70 °C and the water temperature is chilled down to 3 °C to 5 ° C. On the other hand, DualBottle can be presented more innovative by introducing another range of models that uses solar energy as an optional charging method therefore; the battery can be charged automatically whenever solar heat is stored. Moreover, when users do not feel like using the function, they could always remove the external component to function it as ordinary bottles like Bros, Sigg and Zebra.In addition, DualBottle is chargeable by using USB port charger and car power adapter as well, this idea enables users to charge DualBottle whenever they want. In fact, DualBottle can act more than a common water bottle where it can perform as a water warmer to keep the beverage warm for 4-6 hours because of the double-wall insulation designed; then it also can act as a water heater to heat up the beverage up to 70 °C, lastly it perform as a water cooler to hill the beverage down to 3 °C. Forget about the traditional design of Thermos bottle in which it looked heavy with stainl ess steel silver colour; DualBottle would design the products with relatively new colours and standout themes. DualBottle would look more colorful and attractive by adding some printings on it, the designs can be plain but sharp colors and candy colours, animal prints for fancy female group, and users can even print their pictures or words on DualBottle.To target different types of customers, DualBottle would allow customers to choose their favourite colour and design or to custom-made their bottle by choosing what design, features, function, colour, and engrave their name on the bottle. Besides, it would be designed for easy to carry by attaching a strap and also slim fit exterior outlook of the bottle. Meanwhile, the cover cap of DualBottle would be anti-leaking water designed which are made by rubber and plastic. It would be easier to design the bottle with open-close cover, instead of using rubber grip cap cover.However, there are also pros and cons to adopt the design of open-c lose cover. For instance, rubber grip cap cover can have better prevention of losing the water temperature in the bottle as compared with the open-close cover. As people are more health conscious nowadays, DualBottle uses stainless steel, aluminium and bisphenol A (BPA) free as inner bottle materials in production line hence; it would not be harmful to the users. Since a metal plate would acts as an electrical conductor to heat up or chill cold the drinks; stainless steel, aluminium and BPA free plastic materials are not an issue to end-users.In general, DualBottle has three different kinds of bottles but they perform the same function for users. This is because to target different group of customers as stainless steel material is usually expensive, aluminium material is on the average price, and plastic material would be cheaper. Nevertheless, high quality of stainless steel materials are usually weigh heavier as compared to aluminium and plastic materials; so materials made of Dua lBottle might be affect the weight of product but however, DualBottle has only two standardized bottle volume which are 500ml and 750ml.To be a part of contributing towards environmental friendly program, we would to use recycle materials if possible. The quality of the product must be proven through some international recognized authorities like FDA (US Food & Drug Administration), LFGB (Europe Food Contact Material Standard), ISO (International Organization for Standardization), and SIRIM (Standard and Industrial Research Institute of Malaysia).Besides, DualBottle would only use high quality of electric thermos which it is also often used by Thermos, Klean Kanteen, and La Gourmet; this is to ensure that DualBottle can produce high quality products instead of using cheap materials. With the fact that the production cost might not be cheap and therefore it is expected that DualBottle is placed in high quality and high price position. Conclusion In the current market, thermos water b ottle is frequently used by the people to store their drinks and keeping their drinks cold or warm for only a very short period of time.Our group has established the gap within the market where people may want to enjoy cold or hot drinks at the anytime and anywhere in their daily life. Thus, we have come out with an innovative product called â€Å"DualBottle†. In developing DualBottle, it is apparent that we will be facing those direct competitors like Thermos, Klean Kanteen, Sigg, and Zebra which have dominated the market for quite a long time in producing thermos water bottle. However, these products only consists the function of preserving heat and not heating or freezing like what DualBottle can do.On the other hand, we also will be facing some of the indirect competitors in the market like water dispenser companies, mineral water companies, some electrical companies that produces kettle and water boiler and even Starbucks as they had launched their own brand tumbler to i ncrease loyalty of their customers. The DualBottle is targeted at travellers, students and working adults who may be very eventful and does not even have the time to sit down and enjoy their drinks. Thus, the ability of DualBottle to heat and freeze drinks enable these people to have a moment of pleasure on their favourite drinks either in hot or cold.The practical side of DualBottle may attract companies to buy in bulk from us in order to supply to their employees as it is very convenient to their daily activities. DualBottle introduces a function where it can be heated up the beverage or chilled the beverage in water bottle by only clicking a button. This function can be done by attaching a metal plate which acts as conductor on the bottom of the inner bottle and then an external component to act as battery to transmit energy.In additional, the external battery is actually an external component which can be attached or removed from the bottle. It is easy to charge by using adapter , USB port, car power adapter, and also solar energy. Moreover, Dualbottle design the bottle by using 3 different kinds of materials which include stainless steel, aluminium, and plastic. There are all having the same performance and with 2 standardized capacity volume of bottle which are 500ml and 750ml.DualBottle may obtain international certificates by government organizations to prove that the bottles are safe to use and has no harms to health. Besides, it would be having attractive outlook as the designs are standout and DualBottle enables customers to custom-made their bottle as well. The cover cap of bottle may be open-close cover design because of convenience and anti-leaking purpose. In conclusion, DualBottle is a high quality dual-function bottle and hence, it would be also selling at higher price. Reference list Alicia,2009.Top 5 Stainless Steel Water Bottles. [online] Available at: [Accessed on 2nd April 2012] Better Bottle Stainless, 2012. [online] Available at: [Access ed on 3rd April 2012] Hydro Flask, 2012. [online] Available at: [Accessed on 3rd April 2012] Klean Kanteen, 2012. [online] Available at: [Accessed on 4th April 2012] Shop Naturally, 2012. [online] Available at: [Accessed on 4th April 2012] SIGG Design Bottles, 2012. [online] Available at: [Accessed on 3rd April 2012] Zazzle water bottles, 2012. [online] Available at: [Accessed on 4th april 2012]

Gender Diversity In Education Essay Example | Topics and Well Written Essays - 750 words

Gender Diversity In Education - Essay Example Instead, diversity can represent variations in interests, perspectives, personalities, abilities and emotions. Gender has a large influence on an individual’s cognitive and emotional development and in their perception. Therefore, gender impacts students learning abilities and in extension a teachers approach to teaching. This paper discusses subject preference as the main challenge teachers have to face in view of variations caused by gender (Cushner et al, 2006). Disparities in education caused by gender are evident in the types of subjects male and female students prefer. On average, most female students prefer arts and languages while most male students are in tune with math and sciences. Is this disparity the fault of the bio-social disposition of the students or the failure of the teachers and indeed the education system? To answer this question one needs to explore the similarities and differences between male and female students in view of education (assuming a mixed g ender classroom). For starters, male and female students are provided equal opportunity for education as stipulated by the constitution. They are also protected against gender bias and even sexual discrimination. Also, in a standard setting, male students are loved by their male and female parents equally (but expressed differently) and the same is true for female students (Cushner et al, 2006). ... On the other hand, psychologists argue that girls may receive instructions with little or no resistance but put emotion in all activities unlike boys who are more factual even at a tender age. Apart from differences in mental development, these factors may contribute to why female students prefer arts to sciences and vice versa for boys (Cushner et al, 2006). The commitment of a teacher to their students in view of human diversity is very crucial because if the teacher overlooks gender differences, both male and female students will suffer. Also, a teacher should control how their gender influences their interactions with the students in a classroom setting. Given the above, a wise teacher will not let nature take its course. The professional thing to do is to understand the differences these students present. For instance, in an essay that requires the personal thoughts of the student, the teacher should be a flexible evaluator allowing the perception of an individual student to gui de them. A male student may focus on aggressive themes such as war while a female student will pick soothing themes such as family. Also, a teacher may opt to give information laden instructions for the sake of a female students understanding and cued information for the sake of male student. This significantly bridges the gap in subject preference among the students. The teacher should also note that male students despite their culture prefer a practical approach to learning compared to female students. Having a half practical half theoretical approach to learning is beneficial to all students (Cushner et al, 2006). Another notable difference is the language abilities of male and female students. Despite the lack of concrete scientific evidence, scholars concur that female

Economic Crisis Research Paper Example | Topics and Well Written Essays - 2000 words

Economic Crisis - Research Paper Example Eventually, critical evaluation of the policies is exercised in order to execute cross evaluation procedure and suggestion of optimal policies are being stipulated in order to strengthen the policy implication paradigm. The propulsion of the economic crisis in 2008-2009 is the devastating economic crisis that the world faced in the past six decades. The crisis was predicted by a host of economists but it was mainly unforeseen. In the World Economic Outlook, the International Monetary Fund (IMF) even inferred that the threats to the global economy are minimal and for the moment there were no anticipations of any severe economic downturn. The juncture before the crisis was infested with widening global imbalances but owing to the virtue of the world’s largest capital markets and its stable financial regulation and political stability, they saw the global imbalances with sustainability angle. Apart from that the emerging developing countries also found a secure place for investin g their funds in order to earn a huge benefit so that they could sustain their position and enhance their credibility in the debt market in the long run. The United States was also considered to possess a superior monetary policy institutions and monetary policy and monetary policy making environment. But the world economy was shattered with the launch of the economic crisis and the crisis shook down the roots of the formidable US economy (Verick & Islam, 2010, p.v). The evil effects of the crisis led to the shattering down of the trade scenario of the world economy with the plight of tremendously declining unemployment rate of the developing economies and subsequent rescue efforts of the government. Launch of the crisis The global economic crisis emerged in September 2008 following the collapse of the strong US financial institution, the Lehman Brothers with the result of the accumulation of the defaults on the mortgages and the derivative products (Lin & Treichel, n.d., p.7). Imme diate impact The financial sector crisis very quickly led to the significant decline in the credit volume in the private sector as well as sharp rise in the interest rates. The equity market crashed and the real growth rate around the globe declined significantly below the projections and the US along with the developed economies. The only exception was China and developing Asia who maintained robust growth (Lin & Treichel, n.d., p.8). The root causes The microeconomic dimension Real estate bubble burst The primal reason for the outburst of the crisis was the bubble burst in the US real estate market. As the house price falling rapidly in the second quarter of 2007, the growth rate of the prices of the real estate saw a declining trend since 2005. In the late 1990s, the housing prices began to rise sharply and deviated from their fundamental characteristics. Reaching the summit in April 2006, the bubble burst rose heavily with the tightening of the monetary policy of the Federal Res erve. With signs that the exaggerated rise in the real estate was coming to an end, the banks decided to issue NINJA loans which were made without any prior income declaration from the borrowers to start paying off debt. With the intensification of the downturn in house prices, the mortgage

Google Technologies Essay Example | Topics and Well Written Essays - 1500 words

Google Technologies - Essay Example Google also has an unofficial slogan ‘Don’t be Evil’ (Google Investor Relations, 2012). The Trimble 3D Warehouse (previously known as Google 3D Warehouse), is a supplementary website for Google SketchUp. This is a website where modelers can download, share and upload 3D Models (3D Warehouse, 2012). The inauguration of this 3D powerhouse was on April 24, 2006. Modelers can use this website to do many things such as upload a collection of 3D models; moreover, its users can also detect certain patterns through algorithm to create similar looking models. Separate models can be observed in 3D right from the Internet browser. According to PC World,  3D Warehouse lets users lacking significant artistic inclination to make and crowd 3D models (Preston, 2008). According to The New York Times, 3D Warehouse had become a virtual "dictionary" of 3D vocabulary. The virtual 3D workshop is so powerful that it suits film making, for instance; people can find detailed three-dimensional virtual models of famous building structures, all over the world. Even a street in Alabama has virtual set that can be used in the movies. With potent search and design tools, high-definition pictures of any bridge in the world can be incorporated into common visual dictionary for later usage. This is not a dictionary of words, but of pictures, readymade images. And these ‘words’ from the 3D vocabulary can be used to make movie. All needed parts can be mashed up with a snap of the finger. 3D Warehouse is such a powerful tool that it makes up a nice collage of image database, and this serves as a unique grammar for image-motion. This tech product from Google has everything good about it. It is such a great tool for tech-savvy, web designers and electronic artists; they can have tons of fun while working with it. The only bad aspect I see is that professional

How are game console interfaces assisting in creating an immersive Essay

How are game console interfaces assisting in creating an immersive gaming experience - Essay Example Games consoles are typically thought Ð ¾f as units that operate through a television or some other large, external screen or monitor. These units require an external power supply, thus severely limiting their portability. The games themselves are mounted on media that is inserted into the unit, such as a CD, DVD or cartridge, or in media such as a cassette, readable through a tape player. The console has a keyboard, sockets for joysticks or other games controllers, or both. Experimentation with current games console technology suggests that the PC is still, despite the considerable price disadvantage, a more realistic and usable device for serious, Network-based research. However, for beginners to the Internet who require only basic facilities, a games console with network access may prove a more fiscally viable option. As Ð ¾f September 2000, the one games console Ð ¾ffering online access possesses significant limitations in terms Ð ¾f browser functionality, and Ð ¾ffers no facilities for downloading files or data. While the computer gaming community is more interested in the speed and playability aspects Ð ¾f online gaming, it is the data and application storage and manipulation functionality Ð ¾f consoles that will need to be addressed, as well as data transfer capabilities, if such devices are to become a serious electronic library accessing option for the academic and research communities. Furthermore, the PC, with the Apple Macintosh a distant second, has a firm hold within the library, educational and other sectors as the system Ð ¾f preference for accessing the Internet. This is due to a combination Ð ¾f familiarity, longevity, educational sales discounts leading to PC prices being substantially cheaper than if bought by members Ð ¾f the public, and the absense Ð ¾f an alternative.

Numerical Precision Assignment Example | Topics and Well Written Essays - 1000 words

Numerical Precision - Assignment Example 32 bits. Floating point numbers is composed of two components that is, the mantissa and the exponent. The exponent consists of eight bits value which ranges from zero to 255. On the other hand, the mantissa is twenty four bit long with 1 being its most significant bit which is usually never stored. Also, there is a sign bit (+ and -) which is used to indicate whether the number is negative or positive Floating point numbers in arithmetic calculations Floating point numbers calculations vary from machine to machine depending on the precision of the machine. Precision is the degree of correctness a given quantity can be expressed; this includes 32-bit single precision and 64-bit double precision that are stored as 8 and 10 bytes respectively. This representation makes it very easy for hardware manipulation. Assignment of these values doesn’t require the knowledge of how the various numbers are stored in memory. For calculation purposes, this requires the pulling of individual pa rts of the numbers involved and manipulating them accordingly. Floating point used in arithmetic computations are easy to work with since they are expressed to base 2 and the exponent is a decimal value that can be expressed as binary within the computer. The fixed number notation of representing floating point numbers may lead to loss of precision such as expressing results in form of 32 bits and they may be greater than 32 bits. Floating point arithmetic is slow and hence less efficient compared to integer arithmetic. Also, floating point arithmetic is less accurate due to round off errors. Floating point format is not memory efficient at all. This is because the results of computation will require additional storage in memory which may be limited. This is usually the case with majority of computers especially personal computers and it’s therefore advisable to let dedicated devices to perform floating point computations. Binary Coded Decimal format This format is a format f or representing decimal numbers such that each number is represented by a number of bits (four or eight bits).There is the packed and unpacked varied binary coded decimal formats. In the packed format, each decimal number is represented using 4 bits (nibble) while in the unpacked format each decimal is represented using a byte (8 bits). For example to represent a number like 41 in binary coded decimal format will be Packed format: 0100 0001 and the unpacked format will be 0000 0100 0001 The packed BCD format is more memory efficient since it reduces on the number of unused bits added to a number. Comparison of the BCD format to the floating point format Precision BCD values are very accurate as compared to floating point numbers. This is because BCD numbers are simply decimal numbers expressed in terms of bits and floating point number format is a scientific notation of large and small values. Performance in calculations BCD numbers are easy to convert and use in arithmetic hence th e overall arithmetic computation is always very fast and efficient. Floating point format numbers must undergo various steps of conversion before they can be used in any computation. These results in some overhead in terms of memory and time hence the computations will be slow. Memory Usage BCD format is efficient in memory usage if the packed version is used. The unpacked version results

Organization Development Essay Example | Topics and Well Written Essays - 1500 words

Organization Development - Essay Example It has been also notified that NAB had a very prosperous past and flourishing from 1980 to 1990. After that, the bank started to lose its credibility due to organizational decisions such as the plan of expansion. 1.2 Importance of the study Numerous factors influence the business effectiveness. Therefore, we will analyze the effectiveness of organization in the context of organizational culture. Many authors have analyzed organizational culture and organizational culture is gaining significant magnitude regarding business enhancement. In the current study, we will discuss several dimensions of organizational culture per se: organizational development, effectiveness and management. Clearly, organizational culture is not a limited subject; it has various branches and affects the whole organization. Moreover, the study will guide organizations for taking right steps in the correct directions. 1.3 Introduction In the current study the weaknesses and a few incidents will be discussed, whi ch have been the core cause of the downfall of the services’ standards of the NAB. Some reasons will be highlighted. This aspect of the study will help to develop a correct future prospect of any bank. Furthermore, the literature review will help to ascertain the true reasons for such happenings. Prior to analyze the current topic, a general view of organizational culture will be put forth for deeper understandings. The context of the current topic will be supported through previously done research. The focal point of the current paper is organizational culture. The organizational culture has been designed with the help of past examples; those examples have been found important, successful, and relevant for the development of organizational culture. Experienced people have obtained the help from organizational practices, and values to develop a hypothesis for organizational culture’s implementations (Schein, 1990). 1.4 Choosing a company; Why bank? I will focus on the National Bank of Australia as every company has a dissimilar history. The bank has gone through very difficult times. Moreover, the social atmosphere influences significantly the banking industry; therefore, in my view to study a culture of a bank is helpful to ascertain the solutions of present cultural issues. I am well aware of the culture of NAB. The National Bank of Australia two decade ago was the largest bank of Australia. It had a reputation. Its shares were selling like a hot cake. The bank had planned to expand its boundaries from Australia to North America and Britain. 1.5 General perception and definition of organizational culture By understanding the behavior, thoughts, point of views and feelings of a group of people within the organization, or in the world, a set of rules and regulations development is called culture (Schein, 1996). To ascertain the attitude of an individual within the organization three-core aspects can be studied within the parameters of cultures, t hese are organizational culture, occupational culture, and national culture (Hofstede, 1991). 1.6 Organizational Culture If there were dissimilarities between shared experiences and standards, it would generate organizational culture; moreover, it is developed and enhanced within the organization and not go beyond the limits of organization. The culture that grows between schooling and university period until the

Social and Psychological Differences in Trifles by Susan Glaspell Essay Example for Free

Social and Psychological Differences in Trifles by Susan Glaspell Essay In the play Trifles, by Susan Glaspell, the central theme of the play are the social and psychological differences between the men and the women. The male characters has a chauvinistic attitude towards women, while the women are more understanding and perceptive than the men in terms of trying to solve the crime. It is because of the mens attitudes that led them to fail in seeing the truth of Mr. Wrights murder. Their attitudes were blatantly apparent while they were assessing the crime scene at the Wright House. Rather than being objective investigators, their negative views towards women and their discriminatory nature of the opposite sex caused them to overlook the situation and automatically branded Mrs. Wright as the killer with no regard for her emotions or state of mind at the time of the murder. The men were more concerned with criticizing Mrs. Wrights lack of proper homemaking skills than trying to find the reason behind the murder of Mr. Wright. In line 157, while looking for evidence, the county attorney complains after washing his hands, Dirty towels! Not much of a housekeeper, would you say, ladies?, while kicking the pans under the sink. His irritation showed his negative attitude because the house was not kept in proper standards by Mrs. Wright. His actions alluded to his beliefs that since women stayed home as house wives, while holding no proper jobs in the world, they should at least keep the house up to par. He defends his opinions to the ladies in line 163 saying that I know that there are some Dickson County farmhouses that do not have such roller towels. When Mrs. Hale and Mrs. Peters quickly defended Mrs. Wright, his reaction was, Ah, loyal to your sex , I see. His demeaning undertone revealed his lack of respect for womens societal roles and believes that wom en are inferior to men. The women on the other hand, were more perceptive and sympathetic to Mrs. Wrights situation. From the beginning, they were the ones that noticed the little things. The effort that Mrs. Wright had to caring for her house even though it was not perfect was not overlooked by the women. They were more sympathetic than the men because they themselves knew the flight it took to run a household, to which the men disregarded. The women were the ones that asked questions. They knew Mrs. Wright before she had married the cold and quiet Mr. Wright. They recalled that Minnie was a lively person and was always singing but later became recluse and closed off from the neighbors after marrying Mr. Wright. They pondered whether or not she had a happy and stable marriage, going through many reasons as to what could have led her to commit such a crime. While the men were busy investigating upstairs, it was the women who found the bird cage as well as the dead bird in the sewing box. They compared Mrs. Wright to the bird in line 449. She come to think of it, she was kind of like a bird herself real sweet and pretty, but kind of timid and fluttery. How-she-did-change. The women based their findings on facts and evidence as opposed to the indifferent attitude of the men. Though the women sympathized with Mrs. Wrights situation, they believed that killing Mr. Wright was still wrong, however, their sympathy and understanding for Mrs. Wright led them to conceal the bird as evidence from the sheriff and the county attorney. The play clearly showed a divide in opposing ideas and attitudes between both sexes. The men were more harsh, critical, rough and self centered where as the women were more intuitive, cautious and sensitive to the situation. Their differences led to them having contrasting opinions on the facts. The mens judgments on women did not allow them to accurately and objectively assess the case where as the women we able to see things that the men overlook. However, though the men were not able to gather more evidence for the case, the women were the ones who found possibly the most important finding, which was the broken bird cage as well as the dead bird. Even after finding the bird, the women decided to commit a crime themselves by hiding the bird from the sheriff. Even though the women were more sympathetic they were still wrong for hiding the evidence. Thus alluding to the fact that the womens emotional nature disabled them the same way as the mens judgmental attitude.

Legislative action on S.640 in the 102nd Congress Essay Example for Free

Legislative action on S.640 in the 102nd Congress Essay The Act which was introduced vide legislative action on S 640 in the 102nd Congress is named the Product Liability Fairness Act. It is deemed to govern the product liability action that can be brought against a manufacturer or product seller, for causing harm by his product. It provides for a civil action being brought against the manufacturer or product seller for the loss or damage to a product itself or for commercial loss which will in turn be determined by the commercial or contract law which is applicable. It is designed to supersede any state law which is inconsistent regarding recovery in such actions. However this suppression is not applicable under a number of varied circumstances to include the defense of sovereign immunity asserted by any State or by the Federal Government of the United States. The Federal law except the Federal Employees Compensation Act and the Longshore and Harbor Workers Compensation Act, the Foreign Sovereign Immunities Act of 1976, the State choice-of-law rules, the right of courts to transfer the venue or apply it to a foreign nation or to dismiss a claim of any foreign nation or citizen on grounds which state that this is an inconvenient forum and also any statutory or common law cause of action including action to abate a nuisance, that authorizes a state or person to institute action for civil damages or civil penalties, clean up costs and so on. Any statutory or common law cause of action, including an action to abate a nuisance, that authorizes a State or person to institute an action for civil damages or civil penalties, clean up costs, injunctions, restitution, cost recovery, punitive damages, or any other form of relief from contamination or pollution of the environment or the threat of it. It also implies that this is a very important issue from the point of view of the hypothesis under consideration that US district courts will not have jurisdiction over any civil action under this Act based on the specified provisions of Federal law relating to district court jurisdiction. The Act also declares that in case of any provision of this Act shortening the period during which the producer of goods or his seller otherwise is exposed for liability, the claimant without cognizance of the period can bring about civil action under this Act within one year after its effective date. Title II of the Act allows any claimant to bring civil action for damages against a person for harm caused by a product applicable under the state law except to the extent such law is superseded by this title of the Act. Expeditious settlement measures include an option to include an offer of settlement for a specific dollar amount by the plaintiff or the defendant in a responsive pleading or award of attorney fees and costs to the party which does not accept the terms of settlement of the offer. It also caters for alternative dispute resolution provisions and mechanisms which are recognized by state laws. In Title III, a person is permitted to seek recovery for harm which has been caused by a product through civil action against the manufacturer or seller under applicable or Federal law to the extent that such law is superseded by the Act. It establishes a standard for liability by a product seller for the causes of the harm which can fall under categories of negligence or express warranty. The conduct of the seller can be examined with respect to a variety of factors such as construction, inspection or condition of the product and for not passing on the warning or instructions from the manufacturers only in case these have not been forwarded when the item was in his possession or has not made reasonable efforts to provide the users with the warning and instructions. The seller is treated as a manufacturer and is liable for damage caused in case the manufacturer is not effective to service of process in any State in which the action could have been brought which is relevant in the case of the hypothesis wherein the Federal laws are said to be applicable in states under the Act. Punitive damages are however proscribed against a manufacturer or seller of a drug or medical device where the drug or the device has received the pre market approval of the Food and Drug Administration (FDA); and the drug has been accepted as safe under conditions approved by the FDA. Similar protection is provided to manufacturer of aircraft which have been subject to pre-market certification by the Federal Aviation Administration (FAA). The factors to be considered in determining the amount of punitive damages have also been covered. Civil action is barred unless the case is filed within two years after the claimant is said to have discovered the harm and its cause and for a capital good which is not a toxic harm, the period is twenty five years after the delivery of product. The Act provides for compensation to individuals when their rights are infringed as there has to be provision for trans state movement of goods. As invariably there is transmigration of goods between states, there is a need for application of a federal law of such nature. The Bill was introduced by Sen. Robert W Kasten. Jr, a Republican on 13 March 1991 and had 39 co sponsors, which was numerically adequate to see the bill through in case a majority of the senators supported it. The proceeding of the Bill was as given below:-(a) The Bill was introduced on 13 March 1991 and then read and referred to the Committee on Commerce. (b) The Subcommittee on Consumer as well as the Committee on Commerce held hearings and it was reported on 14 November 1991 without amendment. (c) It was referred to the Committee on Judiciary by unanimous consent in June 1992. (d). After consideration by the Judicial Committee it was placed for consideration in Senate by Unanimous Consent on 8 September 1992. (e) Cloture motion to proceed was presented and withdrawn on 8 September 1992. (f) Cloture to proceed was not invoked in Senate by Yea-Nay votes on 10 September 1992 and again not invoked on reconsideration by Yea – Nay vote of 58 – 38. (g) There after this was not pursued further. However the Act in a modified form and through a separate motion has came into force in 1995. The issue before us is however that of liberals being federal focused vis a vis the conservatives. The bill was designed to regulate inter state commerce and provide a uniform product liability law as per the title. It was extensively for the benefit of the individual and the consumer and for all purposes should have been considered by the Senate and approved. However it appears that the underlying clauses in the Bill as given below which restricted the powers of the state could have contributed to its rejection for cloture:- (a) It declared that U. S. district courts did not have jurisdiction over any civil action under this Act, based on specified provisions of Federal law relating to district court jurisdiction. (b) Superseded any inconsistent State law regarding recovery in such actions. A quantitative analysis of the votes has been carried out in the Tables 4 to 6 given below. An examination of Table 4 will reveal that the overwhelming votes of Republicans, 40 have not been in favor of cloture of the legislation with only three for it. The liberal opinion has been with 18 not in favor of the cloture and 35 for it. This clearly indicates that the Republicans were not in favor of restricting the powers of the states even when these were in favor of the individual and also affected the regulation of commerce. This would have avoided a number of vexed issues arising out of inter state commerce which could have been smoothened. But the lack of cloture prevented from such a logical course taking place. The Republican bias towards state independence once again proved to be the stumbling block. An evaluation of the percentages polled will amplify this aspect further for which Table 5 may be examined. The Republicans have voted with an overwhelming 93. 1 percent against the cloture while 66. 1 percent of Democrats were in favor of the cloture. Thereby establishing that a majority of liberals do vote in favor of such motions which provide for federal control on issues which impinge on state – federal relationship. In case the voting is examined quantitatively in terms of percentage of voting in terms of Ayes and Nays with party affiliation, it would emerge that 68. 9 percent Republicans and 31. 1 percent Democrats had voted against the cloture and only 7. 9 percent Republicans and 62. 1 percent Democrats were for cloture. Thus the Democrats are deemed to be overwhelmingly in favor of the cloture.

Introduction To Business Strategy Of Cricket Marketing Essay

Introduction To Business Strategy Of Cricket Marketing Essay Organizational strategy gives an idea about the organization that what the organization want to achieve and the they the processing to achieve their wants. It basically includes the purpose of the organization. Its considering that goals and objectives, and the plans and methods to achieve. A strategy also involves the determination of the entire basic long term goals as well as objectives of the organization.   At the same time, it adopts the courses of action that is necessary and the allocation of all the resources needed to achieve the goals. A business strategy is a report that shows the plans of the entire business. It is a plan that is often used so that they can attract financing from big investors as well as creditors. This is a plan designed to give information regarding a new venture so that they can convince financial backers to invest in the said business. It describes the market opportunities that the business intends to develop, the process on how they are going to do it and the resources that are required to make it possible. Business strategies demonstrate the following roles: 1. It is applied to encourage people to invest in an organization. 2. It is also a tool used to assure creditors about the credit worthiness of the organization. 3. Another role is to persuade banks to lend or perhaps invest money. 4. Last, but not least, business strategy helps you stay focused on the important for your business in order to achieve your goals. It saves your time, energy and money. And since this is necessary, a strategy needs to: Show the lender or the investor that they have a big chance of being repaid and that they will be getting good returns on their investment. Build the necessary confidence for the firm and the capabilities of the owner. Show the investors that there is a very good market for the service or product that you offer. Show you a clear picture where youre heading and how to get there. A good business strategy is the base ingredient for a successful business. However, there are many different kinds of business strategies. The best business strategy should be able to guide your company into a direction wherein the expected internal pressure due to business continuity meets the great demand of the fast changing world for the revolutionary business plans. There are basically three types of strategies in which business holders must concern themselves: 1. The plain strategy or the strategy in general. This refers to how a specific objective will be achieved. The strategy in general mainly concerns the relationship between the results we want to have and the resources that are currently at our disposal. 2. Next is the corporate strategy which defines the market and the business wherein a certain company will operate. Corporate strategy is usually decided through the context of being able to define the companys mission and vision. This is the same as being able to recognize what the company does, why it exists in the first place and what it intends to become in the future. 3. The last type is the competitive strategy which describes a given business the basic that is needed for it to be able to compete. This type of strategy is centered on the companys capabilities, its strengths and weaknesses. This is used in relation to the market characteristics as well as the corresponding abilities, strong points and weaknesses of the competitors. Definition Johnson and Schools define strategy as follows: Strategy is the direction and scope of an organization over the long-term: which achieves advantage for the organization through its configuration of resources within a challenging environment, to meet the needs of markets and to fulfill stakeholder expectations. Cricket The game Cricket is I have selected for this assignment. Cricket is a sport, which is played between two teams of eleven players each by bat and ball. There are 15 players in one team but only eleven can play. A cricket match is played on a grass field (ground), in the centre, there is a pitch of which is a flat strip of ground 22 yards long. At each end of the pitch, there is wicket of a set of wooden stumps. A player from the fielding team (called the bowler) drive forward a hard, fist-sized cork-ball in from one wicket towards the other. The ball usually bounce once before reaching a player from the opposing team (called the batsman), who defends the wicket from the ball with a wooden Bat. The batsman, making runs between the wickets, with the help of non-striker till he is not given out. Non-striker is standing in near the bowlers wicket and plays an inactive role, to make runs. The other members of the fielding team stands in various positions around the field as fielders. The match is won by the team that scores more runs at the end of the match. Cricket was established before approximately hundred years ago in England. Cricket is the most popular sport in the South Asia, such as India, Pakistan, Bangladesh, and Sri Lanka,. It is also a major sport in other countries such as England and Wales, Australia, New Zealand, South Africa, Zimbabwe, Bermuda, and West Indies. Batting and bowling are the main factor of the cricket. The aim of the batting team is to score runs as much as possible. When both batsmen successfully move to their respective opposite ends of the wicket one run scored. The aim of the bowling team is to get each batsman out or dismissal and prevent the score of batting team. Dismissals are achieved in a different ways. The most directive way is that the bowler bowl the ball in such a way that it escape the batsmans guard and hits the stumps, unload the bails. While the batsmen are trying to get run and the fielders may to knock stumps by the ball before the batsman has reached the crease which is nearer to the stumps. Other way is that while the fielding side catches the ball before it touch the ground. Once the batsmen are not attempting to score any more runs, the ball is dead and is bowled again (each attempt at bowling the ball is a ball or a delivery). When a batsman dismissal on zero (0) run, called duck out, while batsman di smissal without facing a single delivery, called diamond duck out. The game is divided into overs there are six delivery of balls in each over. At the end of an over, the batting and bowling ends will be change and the bowler will replaced by another bowler of the fielding side. The two umpires also will change positions at this time, and sometimes the fielding positions also may be changed by the captain. When one batsman is given out by the umpire, he will replace by the another batsman to lineup his team. When the tenth batsman is given out, the innings of the batting team will end i.e. all out, since there are always must be two batsman on the pitch. ( in limited overs Cricket, the innings end either when the batting team is all out or the fix number of overs are bowled by the fielding. This type of cricket called as One-day-International. At the end of an innings the two teams exchange roles, the fielding team becoming the batting team and batting team becoming fielding team. The team which has score more runs at the end of the completed match, that team win the match. There are different types of the completing the match for illustrate there may be restrictions on the number of overs. The number of balls in each inning etc. A draw is not an uncommon result in Test cricket, if the team that is last to bat has not scored enough runs to win but has not been dismissed before the end of the play. Cricket is just a game between two teams, which are fighting for win. In cricket there are three types of format i.e. One Day International (ODI), Test Cricket, 20-20 cricket. In ODI there are limits 50 overs per an innings. Both team is bat and bowl alternately. Each team can play only one inning per match. Earlier there are 60 overs in an innings but now its decease up to 50 overs. Test Cricket is the five days game. There are 90 overs of limit in one day or one day ( 8 hours play ). In earlier there are six days game but now its decrease up to the five days. Both team can bat and bowl two time i.e. both team can play two innings. While in 20-20 cricket there are only 2 overs in an innings. This type of cricket recently started in 2007 to play. Pestle analysis It is very important that an organization considers its environment before beginning the marketing process. Environment analysis should be continuous and fees all aspects of planning. The organization al marketing environment is made up of : The internal environment e.g. staffs, office technology, wages and finance etc. The micro-environment e.g. external customers, agents and distributors, suppliers, competitors etc. The macro-environment e.g. political forces, economic forces, social cultural frces and technological forces. P Political Factors E Economic Factors S Social Cultural Factors T Technological Factors Pestle analysis of Cricket 1 Political Factors The political arena has huge influence upon the regulation of cricket and spending power of charm and other games. Now a days political affairs are increasing in the sports. The lead member of selection committee, selecting his state players for the team, though there are other guy is expected for that place in team. Some time selection committee selecting the players by receiving money i.e. corruption. 2 Economic Factors Economic factor is strongly affecting this game. People/players need to consider their economic power/budget. Economic factor is most affecting factor of the sports. If you want to increase our skills and ability and potentiality highly, you have to pay the high rates of fees. In India, many youngsters are good cricketer, but due t their financial problem they are not able to pay high fees. Even if you want to play in major tournament like Rangy Trophy and Tulip Trophy, there is also u have to pay lot. 3 Social Cultural Factors The social and cultural factors influences on games vary from country to country. Its important that such factors are considered. This factor is not more affecting in India. In the earlier, when cricket was discovered, many number of families are not ready to accept this game because its not our game. But today whole the situation is change. Cricket is most popular game in all over the world. 4 Technological Factors Technological is vital for competitive advantage, and is a major driver of globalization. In earlier, there are no more safe guards for the batsmen, so its very tough for them and to play. But now a days, different sports companies are providing their best safe guards for the batsmen such as, helmeted, hand gloves, thumped, allured etc. So, its providing safety to the players and preventing their injuries. Five forces 1 internal game plan Every team have to clear their internal game plans. Batsmen are trying to scoring as much as they can, and bowlers are trying to take wicket and preventing the scoreboard. Here captain is play an important role, he has to change the game plan when its needed. So he should prepare and be ready with alternates plans. Fielders are also helpful to preventing competitors score. 2 External game plan Team should know the strangeness of their competitors. They should not under estimate their competitors. Every team should make proper game plan against their competitors. They should analysis on their competitors, and find out their strong nesses and weaknesses. 3 Environment Environment is most affecting factors in this game. They should know about the environment, where is they are going to play game. Different country are mostly playing in their country and also they are getting their coaching and trainings. Thus different teams are habitual to play in different environment e.g. in Asian Cricket teams such as Sri Lanka, India, Pakistan are likely habitual in high tempera where as the western or Wales country like England, Australia, New Zealand etc are likely habitual to play in cold weather. So when ever they are on tour to another country they should manage and settle their self in different weather. 4 Technology Technology is also important for players. Players can give their best performance by better technologies. Now-a-days new bats, are better than old, safety gourds are providing better safety rather than old on. Training is needy when new technology comes and players are unaware about it. So they need proper training of it that how to use it. 5 Training Training is one of the important factor. Every players or team members need training. Without training they cannot give their best performance. Selection committee prefer those players who are well trained by the technicians and coach. There is one guy who is regularly following them and notice their improvement, he is call as a coach. Success Factor The team has to make game plan for the match. Moreover they should make alternate game plans for the match. Alternates plan very useful when its needed. Batsmen are comes on the field to maximize the score as much as they can, bowlers are comes on the field to get wickets and prevent the score of competitors. Fielders are helping bowlers by their fieldings and preventing the competitors score. Team analysis For team analysis I have selected two teams. One is India and another is Australia. Both team are good, but only one team can win the match. In India, there are very experience players such as, Sachin Tendulkar, Veranda Sewage, Zaire Khan, Harbhajan Singh, Yuvraj Singh. Sachin hits 48 ODI and 51 TEST Century with 44 batting average approximately. He made more than 29000 runs in Cricket ( include ODI and TEST). Sewage well known for his classic outstanding starts. Sewage likely hitting the balls to pulling the scoreboard fastly. Harbhajan Singh and Zahir Khan are leading bowlers of India. Both were taken more than 200 wickets in ODI and Test respectively. Moreover, there is one guy who is leading the whole team i.e. MS Dhoni. He is good batsman. He always keep their mind cool in every stressfully situation. He take their own decision to win the match. Yuvaraj Singh and and Suresh Riana also can be hard hitter. They both are strong while they are on field. Other side, in Australia there is a one leading captain named Ricky Pointing. He won two times World Cup tournament for his team. There are very good batsman such as Shane Watson, Mike Hussey, David Hussey, Michael Clark, Cameron White. etc. They are very good batsman and all are able to change the game. Shane Watson is always keep his strike rate high that means team run rate is also high. Michael Hussey, Michael Clark and Cameron White can be hard hitter when its needy for team. Moreover there are Doug Bollinger, Brett Lee, Michael Johnson are good bowlers. While there talenders also can bat well. They all can good fields, while they are on ground. Conclusion Plus points are not necessary to win the match. May be some times a team has to lose the match though they have more plus points rather than their competitors. Some times their one mistake can be cause of your lost. Though only one team can win the match, which one will give their best performance in in stressfully situation.

The Re-Creation of a Young Roman Girl Essay examples -- Rome Culture T

The Re-Creation of a Young Roman Girl At seven years old this young, upper-class1 Roman girl, daughter of a prominent political figure, is posing for a portrait of her face. Her father is demanding her whole family have one done so that everyone can see their family displayed for years to come. As predicted by her father, Roman art historians are very interested in these portraits and the past they represent. In 1998 this bust is a rare and exceptional find among art collectors. This portrait is now one of twenty-one sculptures found in the Riley Collection of Roman Portrait Sculpture at the Cedar Rapids Museum of Art. This portrait is rare, first because it is a portrait of a child, and second because it is portrait of a young girl. Children were often exposed in ancient Rome, especially young girls. The reasons for exposure are probably monetary. Poor families could not afford many children, and wealthy families did not want to have to divide their inheritance any more than necessary. Boys were most often kept because they would be the heir to the family and preserve the family wealth, while daughters would require a dowry to be given to her husband.2 When the portrait is finished, this young girl and her two older brothers, would be immortalized in stone. This portrait may have been chosen to be made at this time because the girl's father had reached a certain political status, or because this girl had reached an age where it was believed she had survived the hardest part of her life, her childhood, or a combination of both.3 It is unlikely this portrait is a funerary memorial due to the simple fact that it is a round sculpture rather than relief. Most grave markers were decorated with relief in the ancient time... ...n citizens. In order for that to occur, both parents had to be legal Roman citizens. Marriage was a necessary function for survival of lineage, not something any Roman man wanted to be trapped in (Dixon, 1992, 60-65). See Lefkowitz and Fant on guardianship and the Julian Marriage Laws. 24 Dixon, 1992, 72-75. 25 Women were seen to be too careless to manage their own affairs, even as adults. However, women could appoint their own tutor, and may have chosen one strictly for social purposes and managed their own money. See Lefkowitz and Fant on the laws of guardianship. 26 Foss tells the story of Pomponia, the wife of Quintus Cicero, when she is a guest somewhere. She was not invited to have the responsibility of organizing and supervising the feast at the estate. Because she is treated as a guest, she refuses to attend the meal. 27 Foss, 1995.

The Importance of Educating Jail and Prison Inmates Essay -- importanc

Summary This paper explores the benefits provided by educational programs in jails and prisons. Included are the reasons inmates need education in order to successfully reenter society once they are released and use the knowledge and skills they have learned to obtain a job in order to support themselves and their families. Also examined in the paper are the financial benefits of incorporating educational programs instead of cutting them, as well as the effect these programs play on the recidivism rate. Lastly is a focus on understanding the importance of education and job training, even though the recipients are criminals. ------------------------------------------------------------------------ A controversial issue in the criminal justice field is whether or not educational programs should be offered to inmates in jail while they are incarcerated. While some might argue that taxpayers should not be forced to fund these types of programs, others agree that it is extremely beneficial to not only the inmates but also the taxpayers. Not only are the inmates the people in society who need education the most, but studies have shown a significant decrease in the recidivism rate of inmates who participated in educational programs while incarcerated. Jails and prisons should increase educational programs to inmates because inmates need education more than ever, it is more financially efficient to provide educational programs and it significantly reduces the recidivism rate. According to experts and inmates, education is a key to successful reentry into society that most inmates are lacking. Over the past twenty years, the need for education within jails and prisons has risen to an all-time high... ...grams-could-save-money Buss, E. G. (2010). Stepping stones to successful reentry. Corrections Today, 72(4), 6-10. Retrieved from http://search.proquest.com/docview/746486739?accountid=38223 Esperian, J. H. (2010). The effect of prison education programs on recidivism. Journal of Correctional Education, 61(4), 316-334. Retrieved from http://search.proquest.com/docview/871418247?accountid=38223 Skorton, D., & Altschuler, G. (2013, March 25). College behind bars: How educating prisoners pays off. Forbes. Retrieved from http://www.forbes.com/sites/collegeprose/2013/03/25/college-behind-bars-how-educating-prisoners-pays-off/ Steurer, S. J., Linton, J., Nally, J., & Lockwood, S. (2010). The top-nine reasons to increase correctional education programs. Corrections Today, 72(4), 40-43. Retrieved from http://search.proquest.com/docview/746496632?accountid=38223

Nationwide Insurance’s Use of BI to Enhance Customer Service

Why did Nationwide need an enterprise wide data Warehouse? Nationwide insurance company is one of the largest financial service company, with $23 billion in revenue and more than $1 60 billion in statutory assets. So in this large business nationwide insurance company experienced a various data issues, like data in-consistence, data reputation, dissimilar data processing, his will shows on business decisions and strategy on market.To resolving the issues Nationwide insurance started using Enterprise data warehouse technology from Attracted, it is a single data warehouse. It would provide best practices to make strategic and tactical business decisions. Data Warehouse is less expensive, stored in single place from different various systems also it will be helpful during critical analysis stage using clean and standardized data and provide solutions in short time instead of spending analysis, gathering he data, cleaning and stored in multiple places. . How did integrated data drive the business values? National wide has developed a customer knowledge store (CSS); it is a customer centric database. The integrated data improve the market and better communication with customers, significantly improved on the customer satisfaction. Sing integrated financial data can improve the customer priorities and resolve the issues in given time like clarify the queries, suggestions, current market situation and etc.In the current market customer satisfaction is very important at any given time using this integrated data business can achieve the goals. 3. What forms of analytics are employed at National wide? In National wide various types of business analytics are used, the data warehouse supports the descriptive analysis for all the business operations. In Predictive analysis the customer Knowledge Store to identify the kinds of customer interactions that are important for customers at different points.In he Prescriptive analytics the financial performance management approache d single data and technology architecture with a common set of systems standardizing the process Of financial data. 4. With integrated data available in an enterprise data warehouse, what other applications could National wide potentially develop? The case described customer relationships and financial reporting. Other areas of development pricing of products, regulatory compliance, hiring, risk management, and the location of facilities.

Structural Functionalism vs Conflict Theory

Structural functionalism and conflict theory have some different points of view. One of them is that structural functionalism sees society as a complex system, that permit it to interact cohesively, and looks society as a macro-level orientation; while the conflict theory focuses on the social system that only work for a select few of society and is known because the struggle for dominance among social groups that compete for scarce resources. Knowing this, How different structural functionalism views gender than conflict theory does in a society?Gender differences are viewed from functionalism as an efficient way to create divisions and specializing of cooperative labour into specifically circumscribed tasks and roles. Also, it is viewed as a social system where particulars segments are responsible for specific labor acts.These division of labor are very efficient because create a maximum use of resources. This theory has been criticized for reifying gender roles. In functionalist p erspective gender roles contribute to social relations.Conflict theory has a different look of gender. In this theory gender is viewed as an attempt from male to keep power and privilege over female, and males are seen as the dominant group while females are seen as the subordinate group. The only reason why gender roles still exist is because to maintain their power and status the dominant group is still working for that.There exist some difference about how this two theories, functionalist and conflict perspective sees gender and what is the importance in society. In my personal opinion I’m more with the idea that functionalism have with gender.

American and North Vietnamese Perception of War

Austin Beeler American and North Vietnamese Perceptions of War To the American Soldiers and the NVA/VC soldiers, the Vietnam War was both very similar and very different. Most of soldiers in Vietnam went into the war with a purpose, and they had a very high morale levels. Both the Americans and the NVA soldiers left with many problems. The war left most soldiers with very severe cases of mental issues. There were also many things about the war that differed to the soldiers. One was the type of patriotism, and the other was the consequences of choosing to not fight.The American soldiers were fighting with a different type of patriotism than the communist soldiers. The Vietnamese soldiers were fighting for their freedom and to protect their homeland. The Americans were fighting for their government. They went into the war completely trusting their government no matter what they thought about the conflict. The war left both sides with huge wounds that would take a long time to heal. The American soldiers left for Vietnam knowing that they have been the victors in all of the other wars and conflicts they have been in.The morale among the soldiers was high at the beginning of the war. The Vietnamese soldiers had very high morale after beating the French in 1954. One American soldier wrote a letter to his fiance that was supposed to be given to her in the unfortunate event of his death. He told his fiance that he is proud that he was even able to fight for his country, and even though the war has taken his life, he wishes that she doesn’t hate the war because of it. The soldiers that were first sent over seas were proud of what they were doing.They believed in their country and they believed that the people back home would have their back. The Vietnamese soldiers had been victorious in beating the French empire just years before the American soldiers arrived. They were in high spirits and it gave them a sense of invincibility because they just defeated a huge power. The Vietnamese soldiers were fighting for their homeland. They saw the Americans as another colonial power that was trying to move in and take control again. The soldiers knew that they could navigate the land much better than the Americans and they carefully planned their attacks.Both of the sides were patriotic, but they were patriotic in different ways. The American soldiers were patriotic in the sense of they were serving for their government and their country. They were fighting because the government told them that they need to be over there stopping the spread of communism. For the Americans it was about making their country proud. The North Vietnamese soldiers were patriotic in a completely different sense. They were fighting for their freedom. They thought that if they didn’t fight, then they would be put back down to a lower level than the Americans.Just like the French had done to them when they were in control. The soldiers were fighting to protect their fa milies back north and to save their land. They had an obvious purpose to fight, while the Americans couldn’t see how the war affected them back home. Both the Americans and the North Vietnamese soldiers left the war affected deeply. Many soldiers returned to their homes and they were severely affected by PTSD. In the book, Kein has nightmares every night that he tries to sleep. That includes the nights he was in the military, and the nights after the war was over.Kein was talking to one of this soldiers and he said â€Å"their chaotic minds, their troubled speech, revealed how cruelly they were twisted and tortured by the war†(20). The NVA soldiers watched thousands of their fellow soldiers die right beside them. Throughout the war, the NVA/VC lost over a million soldiers. Seeing that many people die affected the soldiers greatly. One of the soldiers in Keins battalion is severely depressed and is thinking about deserting the rest of the soldiers and heading home. Kein tells him its suicidal and shameful. Can saying â€Å"Suicidal? Killing myself?I’ve killed so often it wont mean a thing if I kill myself. As for the shame†¦ In all my time as a soldier, I’ve never seen anything honorable†, shows how desensitized the soldiers are. They don’t care about death anymore. Many of them embrace it because they know its coming. The American soldiers were just as scarred by the war. One of the soldiers that reflected on the war in 1984 basically said that depression kills you faster than a bullet to the head. It â€Å"eats away at you inner being. It eats away at everything that you ever learned (5). † The soldiers with depression didn’t get help from anyone.The only people they got help from were the psychiatrists they paid to go see. Both sides used drugs to help cope with the sorrows of war. The Vietnamese soldiers smoked the Rosa Canina flower, and the American soldiers smoked marijuana and used heroin. The drugs helped the soldiers deal with the depression of war. The war was a very tough place for both sides. Both countries had a very hard time recovering from the war, but the people who had to overcome the most were the soldiers. They went through so many things in war that they left Vietnam with â€Å"young shoulders that bore rather old heads (2). †

Complete Course Material Essay

MGT 426 Complete Course Material MGT 426 Week 1 DQ 1 Why is change necessary? What about change is disruptive? How can meeting the challenge of change become organizational opportunities? MGT 426 Week 1 DQ 2 Change: what is in it for me? What is the cycle of change? What are some examples of continuous change? What are some examples of discontinuous change? What are some differences between continuous and discontinuous change? MGT 426 Week 1 Individual Assignment Article Review MGT 426 Week 2 DQ 1 What is organizational culture? What is the relationship between shared vision and organizational culture? How does organizational culture affect an organization’s ability to cope with change? MGT 426 Week 2 DQ 2 How does modeling a change process facilitate change? What are the strengths and weaknesses of the three change models? What are some applications of the three change models? MGT 426 Week 2 Individual Assignment Roles of Managers and Individuals Paper MGT 426 Week 2 Learning Team Assignment Managing Change Paper Part I MGT 426 Week 3 DQ 1 Why is it important to do a gap analysis? How do you apply gap analysis to the change models? Give an example of when you may use a gap analysis. MGT 426 Week 3 DQ 2 What are the steps in implementing change? What should you consider when selecting a change implementation model? Explain. MGT 426 Week 3 Individual Assignment Resistance to Change Paper MGT 426 Week 3 Learning Team Assignment Managing Change Paper and Presentation Part II MGT 426 Week 4 DQ 1 How do you measure the progress of change? How do you know change has been institutionalized? How do you determine what changes have occurred? MGT 426 Week 4 DQ 2 What organizational systems are impacted by the cycle of change? Explain. What systems are not as easily impacted by change? Why or why not? MGT 426 Week 4 Individual Assignment Ethics During Change paper MGT 426 Week 4 Learning Team Assignment Managing Change Paper Part III MGT 426 Week 5 DQ 1 What characteristics of a learning organization do you see in your organization? What can your organization do to transform into a learning organization? MGT 426 Week 5 DQ 2 How closely does your organization follow Senge’s five disciplines? Is this useful? Why or why not? MGT 426 Week 5 Individual Assignment Learning Organization Paper MGT 426 Week 5 Learning Team Assignment Managing Change Paper and Presentation Part IV

Automated Testing of Distributed and Heterogeneous - Free Samples

Various healthcare organizations are now working with a huge chunk of data. The database is consisted of this chunks of data organized in a proper manner. The information is derived from the data that are collected by the system. The Information System is the piece of technology that assist an organization to manage the data and process the data to generate information. The information system also responsible for generating reports based on information that assist the management and doctors to take decision precisely. The report is consisted of discussion on two subsystems of the James Healthcare Organization. The sequence diagrams have been developed based on the patient registration sub system and appointment scheduling sub system. The report also provide the ways of modifying the designs to make it more effective.   James Healthcare Center is a renowned organization that operates its business based on twelve thousand patients and four hundred and fifty staff. The owner of the organization is currently thinking of opening a new center that will consists of all the modern medical facilities. The organization provide insurance coverage to its employees. The need of the modern technology and information system is required to support the business growth. The new system will be replacing the old paper based processes of the organization. The office manager supervises all the employees of the organization. The HR handles the staff benefit and human resources. Lee Sue is responsible for managing the appointments of the healthcare. He has to maintain the appointment related data single handedly. This is a critical and effortful process. The possibility of errors is very high. The patient registration is s crucial process as it is consisting of the data that will identify the patient. The project will be developed using the agile methodology where the organization will be able to develop the system based on the prototype development. The designs of the project is created on the OO design. The system will be responsible for making the reports for management so that they can facilitate the decision making. The clinical decision making system will be integrated into the system so that clinical treatment decisions can be taken properly. Electronic Medical Record is the data storing technology that will hold the patient treatment related data. The EMR will hold the patient details, diagnosis details and its results, the test reports, the doctors who are providing treatment, the medicines that are prescribed to the patient and the effect of the medicines and much more. The project is consisted of various parts and development of various subsystems. These subsystems will be developed individually and then bined to create the plete system. The system will be running on a single server. The project will be developed using various programing languages. Database that can store business and patient health related data for a very long time. The ERM will be integrated into the system to hold the patient health and treatment related data. A CDSS or clinical decision support system that can facilitate the decision making process of the system.   The deliverable of the project are as following. The main constraint of the project is designing of the system. The system design is based on the ou e of the requirement analysis process. If any issues occurs in the requirement analysis process then the system project will fail. Managing the change in the organization is a considerable issue. The main requirements of the system are human resource, support of the stakeholders, programing language, database, network and many more. The programming language is used for making the GUI and the backend coding of the system. The functionalities of the system will be developed using the programming language. The data base will allow the system to hold the data in a secure location. The database has to be accessed through a predefined queries based on the database type. The deigning software is a crucial requirement of the project. The software will be used for designing the system functions and interactions with the end users. The software form third parties and the hardware to setup the system are also significant requirements of the system. The system network will be developed using the wireless method. All the client devices of the network will be connected using the Wi-Fi.   The advantages of the project are as following. Figure 1: Patient Registration Subsystem Sequence Diagram   Verification and Analysis: The sub-system design has been done using the system sequence diagram. The diagrams has been done properly to establishing a fine understanding of the sub-system processes. At the beginning, the patient will open the application or website (which is no concern of the report) and enter the details. The details will be consisting of the data like patient personal data such as name, address, spouse, age, email address, phone number and many more. It is to be assumed that a patient may want to open various accounts on the system to cheat the organization or may forgot he has one existing. In such cases, the system will verify all the details provided by the patient to ensure that the patient does not have any previous account. The patient will input the id and password of his wish to the system so that using the id and password the patient can later login to the system. The system will then read the inputted registration details and convert it into the machine readable values. The system will be developed using the object oriented language like java, python or any other. The system development will be based upon the OO designs. The designs have to be as per the proposed scope of the system. The designs will be created using the user data that are provided during the requirement analysis process. In this diagram the patient has been the actor who will trigger the system functionalities. The patient object will trigger the registration function mentioned as the `register()` in the diagram. The register function will be acting upon the defined variables which will be initialized based upon the user input. The variables will then be used by the system to verify user and register patient after success verification. The system design has been done with pleteness as it is consist of all the processes that are required to register the patient. It is mon in the healthcare industry that a patient ing from a doctor who has been providing treatment to the patient. The system will hold the data of the doctor so that it can be used for future decision making purpose. The system will be storing the daises of the patient that is already known so that assistance can be provided during treatment. The EMR will hold the data like to which medicines the patient has allergy and more. As this data will be recorded during diagnosis, these data will not be considered at this sub-system development.   Figure 1: Patient Registration Subsystem Sequence Diagram Verification and Analysis: The payment registration will also be done by only the interaction of the patent. No receptionist or other staff of member will be handling the appointment process anymore. The system will hold the appointment related data into the system and based on these data and patient desired appointment details, the new appointment will be scheduled. The system will be collecting the data form the patient through the GUI provided to him/her. The patient will access the system and login to the system using id and password. A session will initiate and the patient id will be used for storing the activities. The patient will request for appointment through the schedule appointment section in the GUI. The user will input the date desired for appointment and the type of the specialist. Selecting the physician is based upon the system it is not up to the patient. After getting all the data from the user, the system will retrieve data from the database. These data will be about the appointment scheduled the preferred day against the selected physician type. If the system fids that the appointment data is vacant in that day then the appointment will be scheduled and if not then the system finds for an alternative day. The patient will select an alternative date. After the patient select the alternative day, a notification will appear in the screen saying the ‘Appointment will be confirm. Are you sure of the date?’ If the patient select ok then the system will confirm the appointment against the patient. The system sequence diagram did not include any information regarding the verification process. Each of the data must be verified so that only authenticated data can be inserted into the system. The sequence diagram can be developed by dividing all the processes into the sub-processes so that all the system functions can be understood properly. Form the above report it can be concluded that the system development process can be difficult task but if done properly then can invite many opportunities for JHC. The system sequence diagram has been a great tool to show the functions of the patient registration and appointment scheduling sub-system. Baresi, L., Pourhashem Kallehbasti, M. M., & Rossi, M. (2014). Flexible modular formalization of UML sequence diagrams. In Proceedings of the 2nd FME Workshop on Formal Methods in Software Engineering (pp. 10-16). ACM. Cerqueira, T. G., Ramalho, F., & Marinho, L. B. (2016). A Content-Based Approach for R mending UML Sequence Diagrams. In SEKE (pp. 644-649). Chitra, M. T., & SHERLY, E. (2016). Verification of behavior preservation in uml sequence diagrams using graph models. Indian journal of puter science and engineering, 7(4), 1-6. Dao, V. T., Hung, P. N., & Nguyen, V. H. (2016). A Method for Automated Test Cases Generation from Sequence Diagrams and Object Constraint Language for Concurrent Programs. VNU Journal of Science: puter Science and munication Engineering, 32(3). Dou, L., Lu, L., Zuo, Y., & Yang, Z. (2014). Verification of UML Sequence Diagrams in Coq. In puter Engineering and Networking (pp. 1233-1244). Springer, Cham. El Ahmar, Y., Le Pallec, X., & Gà ©rard, S. (2016). Empirical Activity: Assessing the Perceptual Properties of the Size Visual Variation in UML Sequence Diagram. In HuFaMo@ MoDELS (pp. 33-43). Faria, J. P., & Paiva, A. C. (2016). A toolset for conformance testing against UML sequence diagrams based on event-driven colored Petri nets. International Journal on Software Tools for Technology Transfer, 18(3), 285-304. Jena, A. K., Swain, S. K., & Mohapatra, D. P. (2015). Test case creation from UML sequence diagram: a soft puting approach. In Intelligent puting, munication and Devices (pp. 117-126). Springer, New Delhi. Kaur, B., & Kaur, E. H. (2015). Clone Detection in UML Sequence Diagrams Using Token Based Approach. International Journal, 5(5). Lima, B., & Faria, J. P. (2015, July). Automated Testing of Distributed and Heterogeneous Systems Based on UML Sequence Diagrams. In International Conference on Software Technologies (pp. 380-396). Springer International Publishing. Minhas, N. M., Qazi, A. M., Shahzadi, S., & Ghafoor, S. (2015). An Integration of UML Sequence Diagram with Formal Specification Methods—A Formal Solution Based on Z. Journal of Software Engineering and Applications, 8(08), 372. Mohapatra, D. P., Godbley, S., & Dutta, A. (2017). Measuring Hit ratio of Software Systems using UML Sequence Diagram. Muram, F. U., Tran, H., & Zdun, U. (2016, December). A model checking based approach for containment checking of uml sequence diagrams. In Software Engineering Conference (APSEC), 2016 23rd Asia-Pacific (pp. 73-80). IEEE. Rhmann, W., & Saxena, V. (2016). Test Case Generation from UML Sequence Diagram for Aadhaar Card Number based ATM System. system, 11(4). Silva, C. V., & Villarroel, R. (2014, November). JPI UML: UML class and sequence diagrams proposal for aspect-oriented JPI applications. In Chilean puter Science Society (SCCC), 2014 33rd International Conference of the (pp. 120-123). IEEE. Song, J., Zhou, Z., & Guan, Y. (2015). Agent UML sequence diagram and meta-model. American Journal of Engineering and Technology Research, 15(1).